Florabest FRT 450 B2 - Manual (Page 50)

50
GB
from the body, particularly the hands
and feet, when you switch on the motor
and while the motor is running.
Risk of injury from cuts.
• Never start the equipment when it is
turned over or not in the correct work-
ing position.
• Switch off the motor and disconnect the
plug from the mains socket:
- Whenever you are not using the
equipment
- If the equipment is left unattended
- When the equipment is being
cleaned, maintained or is to be in-
spected
- When relocating the equipment
- If the power or extension cable is
damaged
- When you remove or exchange the
cutting device or manually adjust the
length of the cutting line
• Check when starting up and working
with the cutting head that it does not
come into contact with stones, rubble,
wire or other foreign bodies. Danger
due to materials blown out of machine.
• Never try to stop the cutting device (cut-
ting line) with your hands. Always wait
until it has stopped rotating. Contact
with the cutter can result in injury.
• Only use an original cutting line. The
use of a metal wire instead of the nylon
line is impermissible. This can result in
serious injury.
• Do not use the equipment to cut grass that
is not growing on the ground, e.g. grass
on walls, rocks, etc. Using the equipment
for purposes other than those intended
can result in dangerous situations.
• Do not traverse gravel paths while the
equipment is operating. Gravel can be
thrown up and result in injury.
• Do not operate the equipment in the
vicinity of inflammable liquids or gases
as this could give rise to the danger of
a fire or explosion.
• Store the equipment in a dry place that
is not accessible to children.
CAUTION! The following states how
damage to the equipment and possi-
ble injury to people can be avoided:
Taking care of the equipment:
• Ensure that the ventilation openings are
not clogged.
• Only use spare parts and accessories
that have been supplied or recommend-
ed by the manufacturer.
• Never try to repair the equipment your-
self. All work that has not been listed in
these Instructions must only be carried
out by an authorised servicing agency.
• Treat the equipment with the greatest
care. Always keep the equipment clean
for better and safer work. Follow the
maintenance instructions.
• Never overload the equipment. Always
work within the stated capacity range.
Do not use low-power machines for
heavy-duty work. Do not operate the
equipment for purposes for which it is
not intended.
• Always inspect the equipment before it
is to be used. Do not operate the equip-
ment if safety devices, parts of the cutting
device or bolts are missing, worn out or
damaged.
Electrical safety:
CAUTION! The following states how
to avoid accidents and injuries due to
electric shock:
• Before each usage, check the mains
power cable and the extension cable
for damage and signs of aging. Do not