Safety instructions – Florabest FRT 450 B2 User Manual
Page 48
48
GB
on the basis of the instruction manual can
therefore not be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protecting the
user should be based on estimated exposure
under actual usage conditions (all parts of
the operating cycle are to be considered, in-
cluding, for example, times during which the
power tool is turned off and times when the
tool is turned on but is running idle).
Safety instructions
For your own safety and the safety
of others, please read these instruc-
tions before using the equipment.
Please keep the instructions in a
safe place for subsequent use.
Ensure that you are completely famil-
iar with all the operating parts before
you start working with the trimmer.
Ask an experienced user or expert
to explain all its functions, manner of
operation and working techniques,
and practise operating the trimmer.
Ensure that you can instantly turn off
the trimmer in the event of an emer-
gency. Incorrect use of the trimmer
can result in very serious injuries.
Symbols on the trimmer
Caution!
Do not expose the equipment to the
damp. Do not work in the rain and
do not cut wet grass.
Wear eye and ear protection
Keep by-standers well
away. Turn off the equip-
ment if they are in the vicin-
ity.
Remove the plug from the mains.
Immediately if the cable is dama-
ged or cut.
Caution!
Read the operating instructions
carefully.
Danger due to materials blown out
of machine!
Remove persons in the vicinity from
the danger area.
dB
L
WA
Noise level rating L
WA
in dB
Electrical appliances must not be
disposed of with the domestic wa-
ste.
Protection Class II
Cutting circle
Cutting line thickness