Florabest FRT 450 B2 - Manual (Page 47)

47
GB
Functional description
The portable, hand-guided lawn trimmer is
powered by an electric motor. The trimmer
features a dual line spool as the cutting
device.
For grass trimming there are two nylon
lines rotating parallel with ground level.
An additional chassis facilitates edge trim-
ming. A hood covering the cutting device
protects the user. The following describes
the functions of the operating parts.
Technical data
Electric lawn trimmer ...FRT 450 B2
Rated input voltage ... 230-240 V~, 50 Hz
Power input ................................ 450 W
Idling speed ........................ 10000 min -1
Weight .................................... 2.35 kg
Dual line ............. 2 x 5 m, fully automatic
Cutting circle dual line ................290 mm
Line thickness dual line.................1.4 mm
Protection Class ............................... II
Protection category ......................... IP20
Sound pressure level
(L
pA
) ................. 82.6 dB(A), K
pA
=3 dB(A)
Sound power level (L
wA
)
guaranteed ......................... 96 dB (A)
measured ... 94.4 dB(A); K
wA
=1.96 dB(A)
Vibration (a
n
) ...... 4.116 m/s 2 , K=1.5 m/s 2
Noise and vibration values have been
determined according to the standards
and regulations mentioned in the declara-
tion of conformity. The vibration and noise
measuring processes in accordance with
EN 786, appendices D and E, were com-
pleted successfully.
Technical and optical changes may be un-
dertaken in the course of further development
without notice. All dimensions, references
and information in this instruction manual are
therefore not guaranteed. Legal claims made
General description
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Extent of the delivery
Carefully unpack the trimmer and check
that it is complete.
Dispose of the packaging material cor-
rectly.
• Lawn trimmer
• Protection cover (black)
• Spacing bow (plant protection bracket)
installed on the grey section of the pro-
tection cover
• Additional handle with adjusting knob
and fixing screw
• 1 replacement line spool
• Instruction Manual
Survey
1 Upper handle
2 ON / OFF switch
3 Power cable
4 Strain relief
5 Screw sleeve to adjust the length
6 Telescopic tube
7 Motor head
8a+8b Two-part protection cover
9 Cutting head with line spool
10 Spacing bow (plant protection
bracket)
11 Adjusting knob and fixing screw
12 Additional handle
13 Line spool
14 Line cutter
15 Hood
16 Locking button
17 Line outlet eyes