Florabest FRM 1200 B3 - Manual (Page 5)

5
GB
Cut height ................... 20 / 40 / 60 mm
Protection class ................................ II
Protection type ............................... IP 24
Weight ....................................... 7.7 kg
Lawn box volume ............................. 30 l
Sound pressure specification (LpA) ............
........................ 84 dB(A); KpA = 3 dB(A)
Noise level specification
measured (LWA) ....................................
........................93 dB(A); KwA = 3 dB(A)
guaranteed ...........................96.0 dB(A)
Vibration on the handle
(an) ......................................... 1.3 m/s 2
The stated vibration emission value was mea-
sured in accordance with a standard testing
procedure and may be used to compare one
power tool to another.
The stated vibration emission value may also
be used for a preliminary exposure assess-
ment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
The noise and vibration values have
been determined in accordance with the
standards and regulations specified in the
declaration of conformity.
Technical and visual modifications may be
made without notice in the course of further
development. All dimensions, information
and specifications in these operating
instructions are therefore not guaranteed.
- Lawnmower and curved handle with
connection cable
- Lower bar
- Lawn box (in three parts)
- 2 screws to attach the bar
- 2 wing nuts and screws for attaching
the curved handle
- 2 holders to attach the
connection cable
- Wheels
Overview
A 1 Curved handle
2 Wing nuts
3 Lower bar
4 Grass box
5 Wheels
6 Lawnmower housing
7 Collision guard
8 Cable holder
9 Power cable outlet
10 Release button
11 Cable strain relief
12 Start lever
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It is
equipped with a high performance electric
motor, robust plastic housing, safety switch,
collision guard, and grass box. Addition-
ally, the equipment is height adjustable
to three levels and has smooth-running
wheels.
For the function of the operating parts,
please refer to the descriptions below.
Technical
Specifications
Electric.Lawnmower... FRM.1200.B3
Motor input power .....................1200 W
Mains voltage .... 220V-240V~, 50/60 Hz
Idling speed ........................... 3350min -1
Blade width .............................. 310 mm