Florabest FRM 1200 A2 - Manual (Page 9)

9
CY IE GB
• Keep the power cable away from the
cutting tool when working. The cutting
blades may damage the power cable
and result in contact with live parts. Al-
ways run the power cable behind the
operator.
• Do not use the power cable to pull
the plug from the socket. Protect the
power cable from heat, oil and sharp
edges.
• Switch off the equipment and discon-
nect the plug from the socket if the
power cable is damaged. If the power
cable is damaged, it must be replaced
by the manufacturer, the customer
services of the same, or a qualified
person, in order to avoid hazards.
• Do not connect a damaged power
cable to the mains. Do not touch
a damaged power cable when it is
connected to the mains. A damaged
power cable may result in contact with
live parts.
General Description
Function Description
The electric lawnmower has a cutting tool,
which turns parallel to the cutting level. It
is equipped with a high performance elec-
tric motor, robust plastic housing, safety
switch, collision guard, and grass box.
Additionally, the equipment is height ad-
justable to three levels and has smooth-
running wheels.
For the function of the operating parts,
please refer to the descriptions below.
Summary
A 1 Curved handle
2 Wing nuts
3 Lower bar
4 Grass box
5 Wheels
6 Lawnmower housing
7 Collision guard
8 Cable holder
9 Power cable outlet
10 Release button
11 Cable strain relief
12 Start lever
Assembly
Disconnect the plug before any
work on the equipment. There is a
risk of injury.
Assembling the Curved Handle
B 1. Insert the lower bar (3) into the
slot on the lawnmower housing
(6).
2. Fix the bar (3) using the en-
closed screws (13).
C
3. Fix the curved handle (1) using
the enclosed screws (14) and
the wing nuts (2) on the lower
bar (3). There are two possible
positions.
4. Clip the cable holder (8) into the
bar (3) and thus fix the cable.
When both wing nuts are loos- When both wing nuts are loos-
ened, the curved handle can be
folded down for storing the equip-
ment. Ensure that the power cable
is not caught.
Assembling the Grass Box
D
1. Connect the two pieces of the
collection box (16).
2. Connect the handle (15) in one
of the two pieces of the collec-
tion box (16).
Do not work with the lawnmower
without the collision guard or lawn
box. There is a risk of injury.