beautypg.com

Maintenance and cleaning, Gb ie – Florabest FGS 10 A1 User Manual

Page 13

background image

13

GB IE

axle click into place in the cor-

responding notches on the left

and right-hand side of the tool.

To remove the

wheels (5), push

the wheels apart

using your index

finger and thumb (clothes peg

grip) and remove the wheels.

Swinging the Equipment: Push the

catch ( 6) on the right-hand side of

the blades. You can now tilt the blade

up and down.

• Push the tool over the ground using

the wheels ( 5). This will ensure

that you keep an even cutting height.

The telescopic shaft ( 20) will

make work easier.

• Grass is best cut when dry and not

too long.

Use as a hedge trimmer

• Move the unit forward evenly.

• The double-sided cutting heads en-

able cutting in both directions or by

swinging the unit from side to side.

Changing the blades

Remove the battery (7) from the unit

before changing the blades (11/12).

1. Press the two quick-release

catches (25) on the battery (7)

and pull the battery out of the unit.

2. Push the safety switch (26) on

the underside of the unit to „UN-

LOCK“ and lift the blade cover

(27) off.

3. Remove the whole blade unit

(11/12).

4. Position the blade onto the unit.

Make sure the fixed blade plate

(28) points outwards. The re-

cesses on the blade fit onto the

pins in the equipment casing.

- Ensure that the foam padding

(30) is inserted correctly.

- If the blade drive (29) has

turned around, turn it by hand

until you can position the blades

(11/12).

5. Place the blade cover (27) onto

the unit and move the safety

catch (26) to „LOCK“.

6. Place the battery (7) into the unit

again.

Maintenance and Cleaning

Leave any work not covered

in this manual to our Service

Centre. Only use original parts.

There is a risk of injury!

Never use cleaning agents or sol-

vents, which can cause irreparable

damage to the unit. Chemicals can

attack the plastic components on

the unit.

Remove the battery ( 7) from

the unit before servicing it.

Wear gloves when handling the

blades ( 11/12). There is a risk

of injury from cuts!

Clean and service the unit regularly as fol-

lows. This guarantees a long life for your

unit: