beautypg.com

Florabest FAHE 18 A1 User Manual

Page 17

background image

17

GB

Charge the battery in a dry

room only. Prior to attach-

ing the charger, check that

the battery’s outer surface is

clean and dry. There is a risk

of injury due to electric shock.

Only use the charger from the pack-

age to charge the battery. Mind not

to charge the appliance for more

than 1 hour at a time. If you do,

the battery and the appliance may

be damaged and longer charging

times would be a waste of energy.

Excessive charging will void the

warranty.

• Charge the battery before the first time

of use. Do not briefly charge the bat-

tery several time in a row.

• If a fully recharged battery lasts for

considerably shorter operating times,

the battery is used up and needs to

be replaced. Only use an OEM spare

battery available from our Customer

Service.

• Always take heed of the applicable

safety instructions as well as the envi-

ronmental protection regulations and

information.

• The warranty excludes all defects

caused by improper handling.

Insert/remove battery

1. To insert the battery (11) into the

device, push the battery along

the guide rail (28) into the de-

vice. It locks into place audibly.

2. To remove the battery (11) from

the device, press the release but-

ton (11a) on the battery and pull

the battery out.

Check the state of charge of

the battery

The state of charge display (11b) signalis-

es the state of charge of the battery (11).

1. Press the button (11c) on the bat-

tery (11).

The state of charge of the battery

is displayed by illuminating the

appropriate LED lights of the

state of charge display (11b).

2. Charge the battery if the last LED

light of state of charge display

(11b) changes from green to red.

Charge battery

Allow a freshly charged battery

(11) to cool down for approx. 15

minutes before inserting it into the

battery charger (22).

LED lights:

• The control display (22a) of the battery

charger (22)

- lights up red at the start and during the

charging process.

- lights up green when charging process

is complete or if the battery cannot be

charged.

• The LED lights of the state of charge

display (

11b) of the battery (11)

flashes red if you have inserted a hot

battery into the battery charger (22).

1. Remove the battery (11) from the

appliance, as necessary.

2. Insert the battery (11) in the

charging compartment of the

battery charger (22). It will audi-

bly snap in.

3. Plug the battery charger (22) into