Florabest FBM 190 A1 - Manual (Page 74)

74
GB MT
Maintenance Intervals
Regularly carry out the maintenance work listed in the “maintenance intervals” table.
Regular maintenance prolongs the life of the equipment. It also gives optimum cutting
performance and avoids accidents.
Table of Maintenance Intervals
Maintenance Work
(See “cleaning and mainte-
nance“)
Before After
After
1 st 5
Hrs.
After
8 Hrs.
After
50 Hrs. Annual
Work
Check and tighten screws,
nuts and bolts

Check the engine oil level /
petrol level and refill with en-
gine oil / petrol if required
 
Clean operating elements /
the area around the silencer
 
Clean the finger protection b

Change the engine oil
  
Replace the air filter a

Clean/adjust the spark plug
Replace the spark plug


Check the silencer and spark
catcher b
 
Clean the air cooling system a,b 
a Clean more often if there is a high level of dust or heavy dirt
b See Briggs & Stratton instruction manual