beautypg.com

Operation, Gb mt – Florabest FRT 18 A1 User Manual

Page 54

background image

54

GB MT

Spare cutting inserts are kept in

the box (4) on the auxiliary handle

(5).

To insert the battery:

5. To insert the battery (16), place it

on the guide track (21) and push

it into the appliance. It will audi-

bly snap in.

Operation

Caution: risk of injury! Do not

operate the appliance without

the protective cover. To oper-

ate the appliance, wear suitable

clothing, eye and ear protection.

Prior to every use, check that

the appliance is operative. Do

not block the On/Off switch or

the switch lock. They must reli-

ably turn off the motor when you

release the switch. Do not oper-

ate the appliance if one of the

switches is damaged.

Please observe local regulations

concerning noise protection.

Turning on and off

Maintain a firm stand and hold the

appliance well with both hands and

at some distance away from your

body. Before turning on the appli-

ance, check that it will not touch

any objects.

1. Check that the battery (16) is in

(see “Assembly instructions - In-

serting the battery”).

2. To turn on, use your thumb to

actuate the switch lock (3), then

press the On/Off switch (2). Re-

lease the switch lock.

3. To turn off, release the On/Off

switch (2). There is no continu-

ous operation mode.

After turning off the appliance,

the trimming assembly will keep

revolving for some time. Allow

the trimming assembly to come

to a standstill. Neither touch nor

slow down the moving cutting

insert. Risk of injury!

Checking the battery charge

level

The battery’s ( 16) charge level is in-

dicated by the charge state indicator (

18).

Press the PRESS button on the battery.

The LEDs indicate the battery’s charge

level.

Recharge the battery if the red or

yellow LED lights up.

Trimmer settings

To adjust the auxiliary handle:

The auxiliary handle can be set to various

positions. Adjust the handle such that the

cutting disk slightly tilts forward in your

working position.



Loosen the screw (23) in the handle

and move the auxiliary handle (5) to

your favourite position. Tighten the

screw in the handle.