Florabest FRM 1800 A1 - Manual (Page 49)

49
MT GB
Trouble Shooting
Problem Possible Cause Fault Fixing
Equipment does
not start
Power is off
Check the socket, cable, wire
and plug and have any repairs
carried out by an electrician
Defective on/off switch
Repair by customer services Worn carbon brushes
Defective motor
Grass too long
Set a greater cut height. Lift the
front wheels slightly by pressing
down on the handle bar.
Motor stops
Blockage by foreign
object
Remove the foreign object
Result
unsatisfactory or
motor labours
Cut height too low Set a higher cut height
Blade blunt
Have the blade sharpened or
replace it
Blade area blocked Clean the equipment
Blade assembled
incorrectly
Install the blade correctly
Blade fails to turn
Blade blocked by
grass
Remove the grass
Blade screw loose Tighten the blade screw
Strange noises,
rattling or
vibrations
Blade screw loose Tighten the blade screw
Blade damaged Replace the blade