Florabest FRM 1800 A1 - Manual (Page 45)

45
MT GB
Assembling the Grass Bag
D
Clip the fabric (18) into the up-
per tray of the grass collection
bag (4).
Hang the fabric (18) of the grass
collection bag (4) into the pipe
clip (19).
Connect the handle (20) in one
of the two pieces of the collec-
tion box (4).
Do not work with the lawnmower
without the collision guard or
lawn box. There is a risk of in-
jury.
Operation
Hanging On / Removing the
Grass Bag
E
1. To hang on the grass bag (4), lift
the collision guard (9) and hang
on the grass bag. Fold the col-
lision guard (9) onto the grass
bag (4). It holds the grass bag
in the correct position.
2. To remove the grass bag (4),
lift the collision guard (9) and
detach the grass bag. Fold the
collision guard (9) back onto the
mower housing.
Emptying the Grass Bag
To empty the grass collection bag,
also use the bottom bag handle
(4).
Adjusting the Cut Height
Switch off the equipment, discon-
nect the plug and wait for the blade
to stop. There is a risk of injury.
F 1. Hold the cut height adjusting
lever (5) and guide it past the
indent to the desired cut height
setting.
2. The handle (8) may be used
to help, in order to prevent to
mower rolling away.
The correct height is around 25 – 40 mm
for a decorative lawn and around 30 – 60
mm for a used lawn.
A higher cut height should be
selected for the first cut of the sea-
son.
Observe the noise protection and
local regulations.
Switching On and Off
G 1. Connect the equipment to the
power supply.
2. Before switching on, ensure that
the equipment is not in contact
with any objects.
3. To switch on, press the release
button (11) on the handle at the
same time as pressing the start
lever. Release the release but-
ton (11).
4. To switch off, release the start
lever (15).
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do not
touch the moving blade. There
is a risk of injury.
Working with the Lawnmower
Regular mowing encourages increased
foliation of the grass and kills off weeds at
the same time. Therefore, not only does
each mowing increase the density of the
lawn, it also produces an evenly resilient
lawn.