beautypg.com

Standing air pump – Crivit Floor air-pump User Manual

Page 2

background image

Standing Air Pump

Dated: 01.03.2011

Instruction Manual

Congratulations on your purchase of this high-quality standing air pump. For safety reasons

we request that you read through the instruction manual and the safety notes it contains as

carefully as possible and to save this, as it can always be helpful if you encounter any problems

with your air pump. The instruction manual is a set component of this product and must be

included if the product is passed on to any third party.

Intended use:

This standing air pump is suitable for infl ating all conventional bicycle tyres. Other uses or mo-

difi cations to the product are considered non-intended usage and can lead to risk of injury and

damages. The distributor bears no liability for damages resulting from non-intended usage. The

product is not intended for commercial use.

Warnings:

You can infl ate all bicycle tyres up to the pump’s indicated maximum tyre

pressure (max. 8 bar / 116 PSI) or to the tyre manufacturer’s indicated maxi-

mum tyre pressure. This can usually be found on the tyre wall. The indicated

maximum values may not be exceeded at any time. Defective or damaged

air pumps may no longer be used due to risk of injury. Defective standing air

pumps must be properly disposed of. Repairs are not possible.

Due to the high operating force and the risks associated with this, the pro-

duct is not suited for use by children or persons with physical and/or mental

disabilities. Please note that the pump plunger and pump cylinder become

very hot over longer periods of pumping due to the friction between them.

For this reason, you should only grasp the pump on the pump handle after

pumping in order to avoid burns.

Due to the risk of injury, a defective or damaged standing air pump may

never be used.

Package contents:

1 x standing air pump

1 x metal adapter for balls,

2 x plastic adapters for air mattresses, infl atable toys, etc.

Technical data:

Type: Standing air pump

Service Centre Nr: 63785 / IAN Nr. 64302

Nominal pressure: 6 bar / 87 PSI

Nominal excess pressure: 8 bar / 116 PSI

Pressure hose length: 62 cm

Production date: 2011

Warranty: 3 years

Distributor & service address:

Internationales Service Center

Schönbornstr. 14

54295 Trier / Germany

Tel. Nr.: 0049 (0) 651 436 6452

E-Mail: [email protected]

www.internationales-service-center.de

Cleaning & care instructions!

- clean with a damp cloth

- do not immerse in water

- Regularly inspect the standing air pump’s screw joints for secure attachment before use.

Maintenance:

The standing air pump is maintenance-free.

Storage instructions!

Please save the product information! The instruction manual is a set component of this product

and must be included if the product is passed on to any third party.

Disposal:

The packaging is made of 100% environmentally-friendly materials which you can dispose of

via your local recycling points. Please obtain information about the disposal options for the

standing air pump from your community or municipal government.

Operation of the standing air pump:

GB

IE

Place the standing air

pump on a level and

stable surface.

There must be no

kinks in the pump

hose.

During pumping, please

always position yourself

with both feet on the

foot plate of the stan-

ding air pump to ensure

it won’t fall over.

Operate the pump

handle in a smooth

and even manner and

not too quickly.

2

3

This manual is related to the following products: