Handling and operation – Crivit CEB 1400 A1 User Manual

Page 51

CEB 1400 A1

Handling and operation

In this section you receive important information for the handling
and operation of the appliance.

Switching the insoles on / oﬀ /
selecting the heat setting

♦

Place the trimmed insoles

in your shoes with the printed

side down and run the cable upward along the heel.

♦

Attach the battery packs

using the straps to your shoes and

connect the connector plug

of the insoles

with the con-

nection sockets

of the battery pack

(see Figure 1).

Fig. 1

IMPORTANT

►

When wearing low shoes, tuck the excess cable into your
socks. The cable must not drag on the ground while walking!

♦

Press the function switch

to switch the battery pack

on.

The battery pack

switches itself on with the heat level I and

the function indicator

glows green.

♦

By pressing the function switch

once again, the heat level II

can be switched on. The function indicator

glows red.

♦

To switch the battery pack

oﬀ , press the function switch

once more. The function indicator

goes out.

NOTE

►

For quick warming, it is recommended to initially select the
the heat level II. It can later, if necessary, be turned down to
the lower heating level.

►

When the battery pack

is discharged, the function indica-

tor

switches oﬀ and the insole

is no longer heated.

IB_100082_CEB1400A1_LB1.indb 47

20.06.14 10:38