Operating your wall control, Troubleshooting guide – Kichler 337011 User Manual
Page 2
5. Attach the Light Dimmer Switch to the wall outlet box and secure with
the two screws provided. (Fig 4)
6. Attach the wall plate to the switch with the two screws provided. (Fig. 4)
NOTE: The On/Off switch (pull chain) on the ceiling fan light
fixture must be set to ON.
Fig. 4
Fig. 5
2
Wall plate
Switch
Outlet box
Screws
Screws
OPERATING YOUR WALL CONTROL
If the switch does not work correctly, check the following.
● Check the main power supply and make sure the circuit is
powered ON.
● Make sure the Light Fixture pull chain is set in the ON position.
TROUBLESHOOTING GUIDE
Light Slide Switch: This Slider turns the light fixture On or
OFF and adjust the Brightness of the fixture. OFF is all the way
down.
See also other documents in the category Kichler Hardware:
- 12011 v.2 (1 page)
- 3000 (2 pages)
- 4100 (2 pages)
- 10566 (2 pages)
- 10579 (1 page)
- 10190BK60 (1 page)
- 10570 (1 page)
- 10215 (1 page)
- 12211 (1 page)
- 10198 (1 page)
- 10589 (1 page)
- 9592 (1 page)
- 12068 (4 pages)
- 12501 v.2 (1 page)
- 12353WH v.2 (1 page)
- 12382 (1 page)
- 12382 (2 pages)
- 12383 (1 page)
- 15070 (2 pages)
- 15215 (1 page)
- 4200 (1 page)
- 4900 (1 page)
- 4100 (2 pages)
- 4931 (2 pages)
- 15565 (1 page)
- 15529 (2 pages)
- 15509 (2 pages)
- 15635 (2 pages)
- 15578 (2 pages)
- 15777 (1 page)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15635 (2 pages)
- 15688 (2 pages)
- 15717 (2 pages)
- 15511 (1 page)
- 15620 (1 page)
- 15415 (2 pages)
- 15671 (1 page)