Epson B163A - Manual (Page 43)

38
Maintaining Your Printer
6. Lower the new cartridge down into
the holder.
Make sure the tabs rest on the hooks
in back.
Caution: Don’t place the cartridge
under the hooks; you may damage the clamp
when you close it.
7. Press down firmly on the ink cartridge
clamp until it snaps in place.
8. If you need to replace the other ink
cartridge, repeat steps 3 through 7 before
continuing with step 9.
9. Press the
e ink cartridge replacement
button and close the printer cover. The
printer begins charging the ink delivery
system.
The green
P power light flashes and the
printer makes noise. Charging takes about
half a minute. When it’s finished, the green
P power light stops flashing and stays on,
and the red
b
error light goes out.
Caution: Never turn off the printer while the green
P
power light is flashing,
unless the printer hasn’t moved or made noise for more than 5 minutes.
hooks