Epson B163A - Manual (Page 17)

12
Printing From Start to Finish
Selecting the Settings You Use Most Often
Your printer settings apply only to the program you’re currently using. If you want,
you can change the Windows default printer settings for all your programs.
1. Right-click the printer icon in the lower right corner of your screen (taskbar).
2. Select Printer Settings . You see the window shown on page 11.
3. Select the default settings you want for all your applications, then click OK .
You can still change the printer settings in your program, if necessary.
Basic Printing on a Macintosh
After you create a document in a software program, follow the steps in one of these
sections to print it using the basic printer settings:
■ For Macintosh OS 8.6 to 9.x applications, see the next section.
■ For Macintosh OS X applications, see page 14.
Printing with OS 8.6 to 9.x
Before you begin, make sure you selected your printer in the Chooser as described on
the Start Here sheet.
1. From the File menu, select Page Setup . Select the following settings:
2. Click OK to close the Page Setup window.
1 Make sure you see SP820 Series
2 Select your paper size
3 Select the orientation of your
document or image