Kichler 380062 - Manual (Page 4)

3
Glass shades
Lamps
Glass shade retainer nuts
2. Raise and hold the light fixture assembly
close to the mounting plate cover. Attach the
wires from the light fixture to the wires from the
fan by pushing the polarized connections
together.
- White wire to White wire
- Black wire to Blue wire
3. Carefully push all the wires back into the
mounting plate.
Attach the light fixture assembly to the
mounting plate by aligning the screw holes (3)
around the outside edge of the light fixture
mount plate with the holes on the fan mounting
plate. Insert all three screws and tighten.
5. INSTALLING THE LAMPS & GLASS
SHADES
1. Remove the glass shade retainer nut from
each socket. Place a glass shade over the
socket and replace the retainer nut. Do Not
over tighten but make sure the retainer nut is
secure and snug.
NOTE: A Socket Nut Wrench has been
provided to help in this installation.
2. Install 3, 40 Watt E-12 candelabra lamps
(included). (Fig. 4)
3. Your installation is now complete. Restore
electrical power and enjoy your new ceiling fan
light fixture.
Socket nut wrench
Fig. 3
Screws
Wire connectors
Mounting plate
cover
Light fixture
Fig. 4