Olympia – Kichler 380001 User Manual
Page 3
2
Olympia
TM
Slide the decorative cover up to the mounting
plate and over the two tabs on the mounting
plate. Gently turn the decorative cover until it
firmly tight and locked into place. (Fig. 2)
1. Remove the socket rings from each socket.
Insert a glass shade into the glass holder.
Using the wrench provided, replace and
tighten the socket ring until it is tighten firmly.
Repeat this procedure for the remaining glass
shades. (Fig. 3)
2. nstall 3, 40 watt candelabra bulbs (not
included). (Fig. 3)
3. Restore power only after installation is
completed.
Light plate
Decorative
cover
3. INSTALLING THE DECORATIVE COVER
2. INSTALLING THE LIGHT BULBS &
GLASS SHADES
Fig. 2
Fig. 3
Glass
shade
Bulbs
Socket ring
Socket ring
wrench
See also other documents in the category Kichler Lighting:
- 49448 (2 pages)
- 49448 (2 pages)
- 49472 (2 pages)
- 49218 (2 pages)
- 11008 (1 page)
- 9360 (1 page)
- 9549 (1 page)
- 9568 (2 pages)
- 9817 (1 page)
- 11251 (1 page)
- 2019 (1 page)
- 42156 (2 pages)
- 2217 (2 pages)
- 15384 (2 pages)
- 15395 (2 pages)
- 15395 (2 pages)
- 15395 (2 pages)
- 16030 (2 pages)
- 15426 (2 pages)
- 15449 (2 pages)
- 15449 (2 pages)
- 15421 (2 pages)
- 15449 (2 pages)
- 15449 (2 pages)
- 15421 (2 pages)
- 15449 (2 pages)
- 15449 (2 pages)
- 15449 (2 pages)
- 15421 (2 pages)
- 15449 (2 pages)
- 15449 (2 pages)
- 16030 (2 pages)
- 15426 (2 pages)
- 15449 (2 pages)
- 15266 (1 page)
- 2101 (2 pages)
- 1675 (2 pages)
- 15087 (2 pages)
- 15276 (1 page)
- 1748 (1 page)
- 2086 (1 page)
- 15323 (2 pages)
- 15361 (2 pages)
- 15079 (1 page)
- 2313 (2 pages)