Kichler 380047 - Manual (Page 4)

4. INSTALLING THE LIGHT FIXTURE
1. Raise and hold the socket plate close to the
light plate of the ceiling fan. Attach the fixture
wires to the fan by pushing the wire
connectors together. White from the fixture to
the White wire from the fan. Blue wire from
the fixture to the Black wire from the fan. (Fig
3)
2. Carefully push all wires back into the light
plate, then install the socket plate onto the
light plate with 3 screws provided. Be sure to
tighten all screws. (Fig. 3)
3. Install the 100 watt, E-11 JD TYPE halogen
lamp (provided) to the fixture socket. (Fig. 4)
4. Attach the glass shade to the socket plate
by turning the glass shade clockwise. DO NOT
OVER TIGHTEN. (Fig. 4)
5. Your installation is now complete. Restore
electrical power and enjoy your new ceiling fan
light kit.
3
Fig. 3
Fig. 4
Socket plate
Screws
Light plate
Glass
shade
Lamp
Socket plate
Wire connectors