Focus, Auto focus, Adjust the focus of the object – Elmo Visual Presenter HV-5100XG User Manual
Page 30
1
2
3
4
5
6
7
8
9
10
11
29
Focus
Adjust the focus of the object.
■ Auto Focus
Press the auto focus button [AF] on the front panel or
the wireless remote control, to activated the auto
focus. While the auto-focus is in operation, the
indicator lamp on the front panel blinks until the
object is brought into focus.
This product features a one-push auto focus function.
Once focusing is completed, the auto focus function is
released, and the focused position maintains
unchanged (FOCUSFREE).
The objects listed below may not be brought into
focus in the auto focus mode. In these cases, use
the manual focus mode.
• Objects bearing little contrast
• Objects with fine repeated patterns, such as
lateral stripes and cross stripes
• Objects glittering or reflecting strong light
• Objects with bright background, or excessive
contrast
• The whole image is dark.
• Objects located near and far away at the same
time
• Objects in motion
If the manual focus button [FOCUS.NEAR] or
[FOCUS.FAR] on the wireless remote control is
pressed, the auto focus will be canceled.
The auto focus function works up to a height of
approx. 10cm (3.9 in) above the stage surface
w h e n t h e z o o m b u t t o n [ T E L E ] i s s e t t o t h e
maximum.
PAUSE
LAMP
POSI/NEGA COLOR/B&W
IRIS
AF
2x
SET
RGB1
RGB2
NORMAL
OPEN
CLOSE
PRESET
CALL
TELE
ZOOM
MAIN
MONITOR
OUTPUT
WIDE
NEAR
FOCUS
FAR
UPPER
BASE
SET
IMAGE
CALL
MONITOR OUTPUT
PAUSE
IRIS
CONTRAST
POSI
/
NEGA
LAMP
WHITE
BALANCE
IMAGE
ROTATION
ZOOM
F.A.M.
MAIN
OPEN
CLOSE
TELE
WIDE
RGB1
RGB2
AF
AUTO/MANUAL
UPPER / BASE / OFF
CONTRAST
POSI
/
NEGA
AF
U
IRIS
AF
NORMAL
OPEN
CLOSE
TELE
ZOOM
WIDE
NEAR
FOCUS
FAR
Front operation panel
Wireless remote control
Front operation panel
Wireless remote control