Elmo Visual Presenter HV-5100XG - Manual (Page 27)

1
2
3
4
5
6
7
8
9
10
11
26
Contrast
To present the material with a little half tone such as
documents.
Images with sharp characters and lines contrasty with
background can be obtained.
When the [CONTRAST] button on the front
operation panel is pressed, the indicator lamp lights
up, and the image becomes contrasty.
When the [CONTRAST] button is pressed again, the
indicator lamp goes out, and the image is reset to the
normal condition.
In the condition of NEGA, contrast is turned ON
only when the gamma setting is
γ = 07 (0.3).
Pause
When the [PAUSE] button on the front operation
panel is pressed, the image from the main camera
pause.
When the [PAUSE] button is pressed again, the
pause mode is canceled.
PAUSE
LAMP POSI/NEGA COLOR/B&W
IRIS
AF
2x
SET
RGB1 RGB2
NORMAL OPEN CLOSE
PRESET CALL
TELE ZOOM
MAIN MONITOR OUTPUT
WIDE NEAR FOCUS FAR
UPPER BASE
SET IMAGE CALL
MONITOR OUTPUT PAUSE IRIS
CONTRAST POSI / NEGA
LAMP
WHITE
BALANCE
IMAGE
ROTATION
ZOOM
F.A.M.
MAIN
OPEN CLOSE
TELE WIDE
RGB1
RGB2
AF
AUTO/MANUAL
UPPER / BASE / OFF
PAUSE IRIS
ZOOM
F.A.M.
OPEN CLOSE
TELE WIDE
PAUSE
MONITOR OUTPUT PAUSE IRIS
CONTRAST POSI / NEGA
LAMP
WHITE
BALANCE
IMAGE
ROTATION
ZOOM
F.A.M.
MAIN
OPEN CLOSE
TELE WIDE
RGB1
RGB2
AF
AUTO/MANUAL
UPPER / BASE / OFF
CONTRAST POSI / NEGA
LAMP
WHITE
BALANCE
IMAGE
ROTATION
UPPER / BASE / OFF
Front operation panel Wireless remote control
Front operation panel
Wireless remote control
Front operation panel
Front operation panel