Analog rgb signal – Elmo Visual Presenter HV-5100XG User Manual
Page 17
16
■ Connection to the analog RGB-out terminal
Connect the analog RGB-out terminal [OUTPUT·RGBOUT] to the equipment having an analog
RGB-in terminal with the analog RGB cable (attached) or a connection cable available on the
market.
At this time, the position of the display may be deviated from the center. If deviated, manually
adjust the horizontal and vertical positions on the connected equipment side.
Also, vertical stripes may appear on the screen of the LCD projector. That can be alleviated
by manually adjusting the dot clock frequency on the projector side.
■ Connection to the composite video-out terminal
Use the composite video-out terminal [VIDEO](RCA pin) and the video cable with RCA pin
plug as attached or available on market.
■ Connection to the S video-out terminal
Use the S video terminal [S-VIDEO](mini-DIN4P) and the S-video cable as attached or
available on market.
Hold the cable plug when connecting or disconnecting the cables.
Analog RGB Signal
■ Signal allocation
■ Pin assignment
10
9
8
7
6
5
4
3
2
1
15 14 13
DSUB 15P shrink terminal (Female)
12 11
Video signal :
Horizontal synchronized signal :
Vertical synchronized signal :
Analogue 0.7V(p-p) 75
Ω terminated
TTL level (positive/negative polarity)
TTL level (positive/negative polarity)
Pin No.
Name
1
Video signal (Red)
2
Video signal (Green)
3
Video signal (Blue)
4
N.C
5
GND
Pin No.
Name
6
GND (Red)
7
GND (Green)
8
GND (Blue)
9
N.C
10
GND
Pin No.
Name
11
GND
12
N.C
13
Horizontal synchronized signal
14
Vertical synchronized signal
15
N.C
LCD projector
CRT Monitor
or
TV Monitor
TV Monitor
1
2
3
4
5
6
7
8
9
10
11