Elmo Visual Presenter HV-5100XG - Manual (Page 11)

Rear Panel
10
1
2
3
4
5
6
7
8
9
10
11
Mouse
Terminal
[MOUSE] USB
Terminal
[USB] Vide-out Terminal
[OUTPUT.S-VIDEO
/VIDEO]
S-Video (mini DIN 4P),
Composite video (RCA pinjack) Analog RGB-in
Terminal 2
[INPUT.RGB2]
Analog RGB-in
Terminal 1
[INPUT.RGB1]
DIP
Switch
12VDC Out
Terminal
[DC12V]
RS-232C
Terminal
[RS-232C]
Analog RGB-out
Terminal
[OUTPUT.RGB OUT] Power Cord
Receptacle
[AC IN]
1 2 4 6 8
3 5 7 9 10
Name Function Reference Page
Analog RGB-in
Terminal 1
[INPUT.RGB1]
Mouse Terminal [MOUSE]
USB Terminal [USB]
Video-out Terminal
[OUTPUT.S-VIDEO/VIDEO]
S-Video (mini DIN 4P)
Composite video
(RCA pinjack)
Power Cord Receptacle [AC IN]
RS-232C Terminal
[RS-232C]
Analogue RGB-out
Terminal
[OUTPUT.RGB OUT]
12VDC Out Terminal
[DC12V]
1
2
4
8
3
5
7
6
Connected to the power cord connector.
To connect the mouse (supplied accessory).
If connected to personal computer with
the attached USB cable, it is possible to
transfer images and control the main unit
by using the software in the attached
Utility Software CD-ROM.
To output images to the NTSC/PAL
monitor, such as TV monitor.
Image is output when this terminal is
connected to RGB input equipment
(e.g., LCD projector, multi-sync monitor).
Input image is output through analog
RGB-out terminal and video-out terminal
when the input selection is set at RGB1.
P.32
P.36
P.16
P.22
P.14
P.32
P.15 P.16
To output DC12V and the image. This
connecting terminal specially designed
for the LCD monitor (LM-5011N)
available separately.
Do not connect the equipment other
than LM-5011N.
To connect the RS-232C cable when
controlling the main unit from the PC.