beautypg.com

Edimax Technology pmn802.11b/g WLAN USB adapter with Wi-Fi Detector User Manual

Page 29

background image

Parameter Descriptio n

Tx Rate

There are severa l optio ns including

Auto/1/2/5.5/11/6/9/12/18/24/36/48/54Mbps for you to select.

Whe n the “Auto” is selected, the device will c hoose t he most

suitable trans missio n rate automatica lly. The hig her data rate you

desig nated in the network, the shorter distance is allowed

between the adapter and the wireless stations.

Whe n the adapter works in 11b mode, the ma ximum data rate is

11Mbps so that there are only “Auto/1/2/5.5/11Mbps” options yo u

can select.

SSID

The SSID (up to 32 printable ASCII characters) is the uniq ue

na me ide ntifie d in a WLAN. The ID preve nts the uninte ntio nal

merging of two co-located WLANs.

The defa ult SSID of the AP is WLAN_AP. Wireless adapters

connect to the AP s ho uld set up t he same SSID as the AP.

Hide SSID

If “Hide SSID“ check bo x is e nabled, the AP will not appear in t he

site survey list of any wireless adapters. It means Only t he

wireless adapters set the same SSID ca n connect to the AP. It

aviods the AP be ing co nnected by una ut horize d users.

Tx Power

There are four le vels for you to setup the trans miss io n power of

the AP. The hig her transmissio n power, the larger transmiss io n

distance a nd wireless co verage.

Change/Apply

Clcik “Cha ng e“ will ena ble yo u to setup the parameters of

“General Co nnectio n Setting“. In the me a ntime, the butto n will

cha ng e to “Apply“ for you to confirm yo ur settings.

WEP

Enable or disable WEP encryptio n f unctio n. If the WEP functio n is

enab led, o nly wireless adapters with the same defa ult key and

WEP key setting ca n connect to the AP.

Setting

Click “Setting“ to setup the WEP key. Please refer to Section 6.3

for more description.

Aut he nticatio n Mode

Open System – No aut he nticatio n is ne eded for connecting to the

AP.

Shared Key – Only wireless adapters using a shared key (WEP Key

identified) are allowed to connecting to the AP.




24

This manual is related to the following products: