Electrolux EOD67043 - Manual (Page 11)

An audible signal sounds for 2 minutes.
The oven switches itself off.
To stop the flashing and the audible sig-
nal:
Press any button.
End time
1. Select the oven function and tempera-
ture.
2. Press the Selection button repeatedly
until End time flashes.
3. Using the or button set the desired
switch-off time.
End time lights up and the cook time
calculated is displayed.
When the time has elapsed, “00.00” and
End time
flash.
An audible signal sounds for 2 minutes.
The oven switches itself off.
To stop the flashing and the audible sig-
nal:
Press any button.
Cook time and End time
combined
Cook time and End time can
be used at the same time, if the oven is
to be automatically switched on and off
at a later time.
1. Select the oven function and tempera-
ture.
2. Using the Cook time function, set the
time that the dish needs to cook, for ex-
ample: 1 hour.
3. Using the End time function, set the
time at which the dish should be ready,
for example: 14:05.
Cook time and End time light
up.
The oven switches on automatically at the
time calculated,
for example: at 13:05.
When the Cook time set has elapsed, an
audible signal sounds for 2 minutes and
the oven switches itself off,
for example: at 14:05.
Changing the Time
The time can only be modified, if the
child safety device is deactivated, nei-
ther of the clock functions Cook time
or End time nor any oven func-
tions are set.
1. Press the Selection button repeatedly
until Time flashes.
2. Using the or button, set the current
time.
After approx. 5 seconds, the clock stops
flashing and the clock displays the time of
day set.
The appliance is now ready to use.
Heat and Hold
The Heat and Hold function keeps your pre-
pared dish warm for 30 minutes, after the
baking or roasting process is completed.
This is helpful, for example, if your guests are
late.
Pre-condition for Heat and Hold:
Set temperature is above 80°C
Switching on Heat and Hold
1. Set clock functions Cook time
and/
or End time .
2. Press the Selection button repeatedly
until the symbol Keep warm appears in
the display.
3. Press the button. “00:30:” appears in
the display.
4. As soon as the oven function is comple-
ted, a signal sounds and Heat+Hold
starts.
The oven function set runs at 80°C for 30
minutes.
As soon as the 30 minutes with Heat and
Hold are over, the oven switches itself off.
Irrespective of an oven function being
set, Heat and Hold remains active. You
can change between the oven functions.
Child safety device
As soon as the child safety device is set, the
appliance can no longer be switched on.
electrolux 11