Edimax Technology AR-6024 - Manual (Page 57)

FTP server: This field allows the user to Enable or Disable the FTP connection. If you
want FTP access from the WAN side you must ensure there are no port forwards
for port 21.
TFTP server: This field allows the user to Enable or Disable the TFTP connection.
DMZ: A DMZ (De-Militarized Zone) is added between a protected network and an
external network, in order to provide an additional layer of security. When there is
a suspected packet coming from WAN, the firewall will forward this packet to the
DMZ host.
DMZ Host IP: The IP address of the DMZ host at LAN side.
DHCP Relay: If it is enabled, the DHCP requests from local PCs will forward to the
DHCP server runs on the WAN side of a network. To have this function working
properly, please disable the NAT to run on router mode only, disable the DHCP
server on the LAN port, and make sure the routing table has the correct routing
entry.
DHCP Target IP: The DHCP server runs on WAN side.
IGMP Proxy: Here is the global setting for IGMP Proxy. If it is enabled, then the
enabled IGMP Proxy on WAN PVCs will be working. Otherwise, no WAN PVC
can have IGMP Proxy working on it.
PPP connect on WAN access: If it is enabled, the PPP session will be automatically
established when there is packet wants to go out the WAN.
PPP Half Bridge: When the PPP Half Bridge is enabled, only one PC is able to
access the Internet and the DHCP server will duplicate the WAN IP address from
the ISP to the local client PC. Only the PC with the WAN IP address can access
the Internet. This function should only be used if one computer will be allowed to
connect to the internet (E.G a Software firewall computer or Proxy server).
Note: Click the Submit button to save the settings in temporary memory. If you make
changes the configurations.
56