Edimax Technology AR-6024 - Manual (Page 31)

DHCP Gateway Selection: The default setting for the DHCP Gateway Selection is
“Automatic”. The user can select the “User Defined” to specify “User Defined
Gateway Address”. The DHCP server will issue the “ User Defined Gateway
Address” to the LAN DHCP client.
Lease time: The lease time is the amount of time of a network user will be allowed to
connect with DHCP server. If all fields are 0, the allocated IP address will be
effective forever.
User mode: Under the Single User mode, the DHCP server only allocates one IP
address to local PC. Under the Multiple User mode, the DHCP server allocates
the IP addresses specified by the DHCP address pool.
Ethernet Mode Setting: The Ethernet Mode Configuration page allows the user to set
the LAN port into Auto Sense, 100 Mbps Full Duplex, 100 Mbps Half Duplex, 10
Mbps Full Duplex or 10 Mbps Half Duplex.
Note: Click the Submit button to save the settings in temporary memory. If you make
changes the configurations.
30