Edimax Technology AR-6024 - Manual (Page 14)

Password: Enter the password provided by your ISP.
Disconnect Timeout: Disconnect Timeout means the router will disconnect after
being idle for a preset amount of time.
WAN Type: Select type from the list.
VC Settings
VPI: If instructed to change this, type in the VPI value for the initial connection (using
PVC 0). Default = 8.
VCI: If instructed to change this, type in the VCI value for the initial connection (using
PVC 0). Default = 35.
Static IP Address: Enter the IP address provided by your ISP. such as
192.168.241.101.
Subnet Mask: Set your Subnet Mask such as 255.255.255.0
BRIDGE
Mode: Select Enable or Disable from the list.
Note: Click the Submit button to save the settings in temporary memory. If you make
changes the configurations.
13