Edimax Technology AR-6024 - Manual (Page 43)

Firewall Databases:
IP Group
The IP Group lets you specify IP Addresses (Single or Range) and Subnet Masks and
assign them to a group name for easy use when configuring inbound and out
bound policies for the firewall.
IP Entry Name: This is the name you assign to the group of IP addresses and subnet
masks. (The IP Entry Name can be up to 19 characters.)
IP addr. 1: This is the IP address or subnet mask you are specifying when creating a
groups.
IP addr. 2: This field is only active if you select to group a range of IP addresses or
subnet masks, in which case this is the end address of that range whereas the IP
addr 1 is the first address of that range.
IP/Mask: This field allows you to specify the address type assigned to the group.
Single IP: This will let you specify one IP address for a given group.
IP Range: This will let you specify a range of IP addresses for a given group, starting
with IP addr 1 and ending with IP addr 2.
Subnet Mask: This will let you specify a range of subnet masks for a given group.
42