Rip configuration – Edimax Technology AR-6024 User Manual

Page 37

RIP Configuration

The RIP System Wide Configuration page allows the user to set the configuration for

each Interface (PVCs, PPP Sessions, USB and LAN).

Interface: This field allows the user to choose the Interface (PVCs, PPP Sessions,

USB and LAN), for the RIP to be configured.

Enable: This field allows the user to Enable (Yes) or Disable (No) the Specified

interface for RIP.

Supplier: This field allows the user to select the Supplier Mode (RIP Transmit).

Listener: This field allows the user to select the Listener Mode (RIP Receive).

Supplier and Listener are based on section 4.1 “Compatibility Switch” in RFC 1723.

Current RIP Settings: This field displays the each interface’s RIP status.

Note: Click the Submit button to save the settings in temporary memory. If you make

changes the configurations.