Emerson Radio ES30 - Manual (Page 27)

2 6
Programmed Playback
You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is
playing press the STOP/BAND button to stop playback before you begin
the programming steps below.
1.) Press the CD/TUNER button on the remote control or CD button on front panel
to select CD mode. Insert your disc in the player, close the door, and wait until
the total track number and play time appear in the display.
2.) Press the MEMORY button once.
The M E M O RY Indicator
flashes and program memory
“P- 01”, Track “01” appears
in the display.
3.) Use the or buttons to select the first track to be programmed.
Example: Track “07”.
4.) When track number “07” appears in the display, press the MEMORY button
once again to enter the track “07” in program memory number “01”.
The track number returns to
“0 0 ” a n d t h e p r o g r a m
memory advances to “P- 02”
indicating that you may now select a track to be entered in program memory
number “02”.
5.) Use the or buttons to select the next track to be programmed. When
the desired track number appears in the display press the MEMORY button
again to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
ES30_072905.p65 29/7/2005, 16:41 26