Operating instructions, Turning the system ‘on – Emerson Radio ES30 User Manual
Page 14
1 3
OPERATING INSTRUCTIONS
Turning The System ‘On’
Connect the unit into the 120V 60Hz AC outlet.
At the front of the unit, the light within the POWER/STANDBY
button will light
‘Red’ to indicate that the unit is in standby (Standby means plugged-in but not
switched on).
Switch the unit ‘On’ by pressing the POWER/STANDBY
button on the front
panel or the remote control. The “Red” light goes ‘Off’.
The unit is now ready to use.
• Make sure that the speakers are properly connected.
• Make sure that the FM Wire Antenna is fully extended.
• Make sure that you have installed batteries in the remote
control.
• Make sure that the AC power cord is connected to an outlet
that is always “live”. Do not connect to an outlet that is
controlled by a wall switch.
ES30_072905.p65
29/7/2005, 16:41
13
- ES1065 (44 pages)
- ES11 (24 pages)
- ES128 (30 pages)
- ES13 (28 pages)
- ES17 (19 pages)
- ES2S (31 pages)
- ES20 (36 pages)
- ES25 (36 pages)
- ES27 (22 pages)
- ES28 (22 pages)
- ES299 (48 pages)
- ES3 (40 pages)
- ES398 (24 pages)
- ES50 (25 pages)
- ES58 (34 pages)
- ES769 (24 pages)
- ES79 (42 pages)
- ES8 (20 pages)
- ES830 (34 pages)
- ES88 (34 pages)
- ES9 (34 pages)
- ES920 (42 pages)
- iE600 (52 pages)
- iP100 (18 pages)
- iP105BK (30 pages)
- iS133 (2 pages)
- MS3100 (29 pages)
- MS3103 (38 pages)
- MS3105 (39 pages)
- MS3106 (39 pages)
- MS3108 (43 pages)
- MS3110 (44 pages)
- MS3111M (47 pages)
- MS7608 (20 pages)
- MS7609 (24 pages)
- MS7616R (22 pages)
- MS7618R (24 pages)
- MS7622 (27 pages)
- MS7625BL (20 pages)
- MS7630 (26 pages)
- MS9600 (36 pages)
- MS9700 (31 pages)
- MS9903TT (31 pages)
- MS9923TT (37 pages)