Emerson Radio ES30 - Manual (Page 18)

1 7
Listening To The Radio
1.) Press the POWER/STANDBY button on the main unit or the remote control.
The main display turns ‘On’.
2.) If necessary, press the TUNER button on the front panel of main unit or the
CD/TUNER button on remote control to select the Tuner function.
The display will show an AM or FM station
frequency.
To select a different band, press the STOP/BAND button.
3.) Tune to the desired frequency as follows:
• Manual Tuning
Repeatedly press the or buttons until the frequency of the desired
station appears on the display.
• Automatic Tuning
Press and hold the or buttons until the display begins to move, then
release the buttons. The tuner will search up or down the band for the next
strong station and stop on that station. Repeat this procedure until the tuner
stops on your desired station.
4.) If you tuned to an FM Stereo station the
STEREO indicator will appear in the
display.
5.) Adjust the VOLUME and EQ controls as desired.
6.) When you are finished listening press the POWER/STANDBY button on
the main unit or remote control to return to the Standby (Power Off) mode.
The display light turns ‘Off’.
ES30_072905.p65 29/7/2005, 16:41 17