Powerplus POWX0178LI HAMMER DRILL 14,4V LI-ION EN - Manual (Page 7)

POWX0178LI
EN
Copyright © 2010 VARO P a g e | 7 www.varo.com
Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained
users.
Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tools operation. If damaged, have the power tool repaired before
use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with
these instructions and in the manner intended for the particular type of
power tool, taking into account the working conditions and the work to
be performed. Use of the power tool for operations different from
intended could result in a hazardous situation.
Use clamps or a vice to hold the workpiece. It is safer and it frees both
hands to operate the tool.
5.5 Service
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
6 SPECIFIC SAFETY WARNINGS
Use appropriate detectors to determine if utility lines are hidden in the
work area or call the local utility company for assistance.
Switch off the power tool immediately when the tool insert jams. Be
prepared for high reaction torque that can cause kickback.
Hold power tool by the insulated gripping surfaces, when performing an
operation where the cutting tool may run into hidden wiring.
When working with the machine, always hold it firmly with both hands
and provide for a secure stance.
Secure the workpiece.
Keep your workplace clean.