Powerplus POWX0178LI HAMMER DRILL 14,4V LI-ION EN - Manual (Page 14)

POWX0178LI
EN
Copyright © 2010 VARO P a g e | 14 www.varo.com
11.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of
the engine.
Regularly clean the machine housing with a soft cloth, preferably after
each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia
water, etc. These solvents may damage the plastic parts.
12 TECHNICAL DATA
Chuck
10 mm keyless
Voltage 14.4 V
No load speed 0-900min
-1
Capacity in wood Ø 16mm
Capacity in concrete Ø 10mm
Capacity in steel Ø 8mm
Charger input 220-240 V 50Hz
Charger rate 5-6 hours
Battery type Li-ion
Battery capacity 1300-1500 mAh