7technical data – Powerplus POWLI424 LED FOLDABLE EN User Manual
Page 3
POWLI424
EN
Copyright © 2014 VARO
P a g e
| 3
www.varo.com
In order to ensure peak battery performace, it is recommended that
the work light be fully charged before being used for the first time.
The battery should be recharged every three months.
6.1 AC/DC adaptor
Insert the charger plug into the DC jacket and plug the charger into a supply socket.
The red charging LED will light up.
Make sure that the voltage rating of the supply corresponds with that of the charger.
The time required to fully charge the unit is about six to eight hours.
When the battery is fully charged, the red LED indicator will turn green. When it does,
unplug the AC/DC adaptor from the wall outlet and unit.
6.2 12V DC car adaptor
Plug the car adapter into the cigarette lighter socket of your car and insert the
adaptor plug into the DC jack of the light.
The time required to fully charge the unit is about six to eight hours.
When the battery is fully charged, the red LED indicator will turn green. Then unplug
the 12 V DC adapter from the car socket and DC jack.
Important note: use the supplied charger only. Other chargers may
cause damage to the unit.
7
TECHNICAL DATA
Model
POWLI424
Nominal lifetime
50,000 Hours
Battery
Battery type
Li-ion
Battery pack
3.7V-1800mAh
Charging time
6-8 hour
Top light
Bulb type
0.5W LED
Working time
20 hours
Side lights
Bulb type
80* 0.06W LED
Working time 1 side (40pcs LED)
3 hours
Working time 2 sides (80pcs LED)
1.5 hours