Powerplus POWLI113 PORTABLE ENERGY SAVING FLOODLIGHT 2X27W EN - Manual (Page 2)

POWLI113 EN
Copyright © 2010 VARO P a g e | 2 www.varo.com
Always keep the lamp away from any heating equipment or similar objects.
6 ASSEMBLING A TUBE INTO THE LAMP HOUSING
 First unscrew the back screws, (total 6 screws) (A)

Take away the transparent front PC-cover and take out the 2H tube base. Twist and
take out gently the tube from the base. Then take a new 2H tube and gently put in
the lamp into lamp base. Make sure that all metal pins are placed in the hole
correctly.
 After replacing, put back the PC-cover and screw all screws back in.
7 SPECIFICATION
Type POWLI113
Power 2x27W
Voltage/frequency 230 V~50Hz
Bulb type 2H Energy saving bulb 27W
Bulb holder G410Q-1
Bulb life-span ≥8000 hours
Cable 1.5 m, H05RN-F2GX1.0mm
2
, with IP44 type plug
Waterproof protection grade IP44
8 ENVIRONMENT
Should your appliance need replacement after extended use, do not
discard it with the household rubbish but dispose of it in an
environmentally safe way.
Waste produced by electrical machine items should not be handled like
normal household rubbish. Please recycle where recycle facilities exist.
Check with your Local Authority or retailer for recycling advice.