Powerplus POW64115 CHAINSAW 37.2CC 406MM EN - Manual (Page 8)

POW64115 EN
Copyright © 2011 VARO P a g e | 8 www.varo.com
fig 3b
 Make sure the chain brake lever is pulled back into
the disengaged position(fig. 3b)
fig 3c
 Remove the bar retaining nut(s) (B). Remove the
chain brake cover (C) by pulling straight out, some
force may be required. (fig. 3c).
fig
3d
 Place the slotted end of the guide bar over the bar
bolt (F). Slide guide bar behind clutch drum (G) until
the guide bar stops (fig. 3d).
7.3.2 To install saw chain:
Always wear heavy duty gloves when handling saw chain or making saw chain adjustments.
fig
4a
 Spread chain out in a loop with cutting edges
(1) pointing clockwise (fig. 4a).
fig 4b
 Slip the chain around the sprocket (B) behind the
clutch (C). Make sure the links fit between the
sprocket teeth (fig. 4b).
 Guide the drive links into the groove (D) and
around the end of the bar (fig. 4b).
B
C