Fuel filter – Powerplus POW64115 CHAINSAW 37.2CC 406MM EN User Manual
Page 21

POW64115
EN
Copyright © 2011 VARO
P a g e
| 21
www.varo.com
fig 15b
Lift the air filter out of air-box (fig. 15b).
Clean air filter with compressed air.
When heavily polluted, wash filter in
clean, warm, soapy water. Rinse in
clear, cool water. Air dry completely.
Note: it is advisable to have a supply of spare filters.
Install air filter. Install engine / air filter cover. Make sure latch (E) latch (F) and cover fit
properly. Tighten the cover retaining knob securely.
Warning: never perform maintenance when the engine is hot, to avoid any
chance of burning hands or fingers.
10.4
Fuel filter
Remove the fuel tank cap.
Bend a piece of soft wire to from a hook at the end.
Reach into fuel tank opening and hook fuel line. Carefully pull the fuel line toward the
opening until you can reach it with your fingers.
Note: do not pull hose completely out of tank.
fig 16
Lift filter (A) out of tank (Fig. 16).
Pull filter off with a twisting motion. Discard
filter.
Install new filter. Insert end of filter into tank
opening. Make sure filter sits in bottom corner
of tank. Use a long screwdriver to aid in filter
placement if necessary.
Fill tank with fresh fuel / oil mixture. See section fuel and lubrication. Install fuel cap.