Powerplus POW64115 CHAINSAW 37.2CC 406MM EN - Manual (Page 27)

POW64115 EN
Copyright © 2011 VARO P a g e | 27 www.varo.com
14 TROUBLE SHOOTING
PROBLEM PROBABLE CAUSE CORRECTIVE ACTION
Unit won’t
start or
starts but will
not run.
Incorrect starting procedures.
Incorrect
carburetor mixture
adjustment setting.
Fouled spark plug.
Empty fuel tank.
Primer bulb was not pressed
enough.
Follow instructions in the user manual.
Have
carburetor adjusted by an
authorized service center.
Clean/gap or replace plug.
Fill fuel tank with properly mixed fuel.
Unit starts,
but engine
has low
power.
Fuel filter is plugged.
Incorrect lever position.
Dirty spark arrestor screen.
Dirty air filter.
Incorrect
carburetor mixture
adjustment setting service dealer.
Replace the fuel filter.
Move to run position.
Replace spark arrestor screen.
Remove, clean and reinstall filter.
Have
carburetor adjusted by an
authorized service center.
Engine
hesitates.
Incorrect carburetor mixture
adjustment setting.
Air filter is plugged.
Old or improperly mixed fuel.
Have carburetor adjusted by an
authorized service center.
Replace or clean the air filter.
Drain gas tank/add fresh fuel mixture.
No power
under load.
Incorrect carburetor mixture
adjustment setting.
Old or improperly mixed fuel.
Air filter is plugged.
Fouled spark plug.
Have carburetor adjusted by an
authorized service center.
Drain gas tank (see storage)/add fresh
fuel mixture.
Replace or clean the air filter.
Replace or clean the spark plug.
Runs
erratically.
Incorrectly gapped spark plug.
Plugged spark arrestor.
Dirty air filter. Clean/gap or replace plug.
Clean or replace spark arrestor.
Clean or replace air filter.
Smokes
excessively.
Incorrect carburetor mixture
adjustment setting.
Incorrect fuel mixture.
Have carburetor adjusted by an
authorized service center.
Use properly mixed fuel (25:1 mixture).
15 WARRANTY
 This product is warranted as provided by law for a 24 -month period effective from the
date of purchase by the first user.
 This warranty covers all material or production flaws. It does not include defective parts
subject to normal wear & tear such as bearings, brushes, cables, and plugs, or
accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from
misuse, accidents or alterations; nor the cost of transportation.
 This warranty covers all material or production flaws, excluding batteries, chargers,
defective parts subject to normal wear and tear such as, in particular, bearings, brushes,
cables,
plugs… Accessories such as drills, drill bits, saw blades etc. do not fall under this
warranty.
 Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
 We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
 Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
 You can always obtain more information at the number 00 32 3 292 92 90.
 Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.