Powerplus POW64115 CHAINSAW 37.2CC 406MM EN - Manual (Page 20)

POW64115 EN
Copyright © 2011 VARO P a g e | 20 www.varo.com
10 MAINTENANCE INSTRUCTIONS
All chain saw service, other than items listed here in your user manual maintenance
instructions, should be performed by a professional.
10.1 Preventive maintenance
A good preventive maintenance program of regular inspection and care will increase life and
improve performance of your chain saw. This maintenance checklist is a guide for such a
program. Cleaning, adjustment, and parts replacement may be required, under certain
conditions, at more frequent intervals than those indicated.
Maintenance checklist
Each use Hours of Operation
Item Action 10 20
Screws/nuts/bolts Inspect/tighten V
Air filter Clean or replace V
Fuel filter/oil filter Replace V
Spark plug Clean/adjust/replace V
Fuel hoses
Inspect V
Replace as required
Chain brake components
Inspect V
Replace as required
10.2 Winter maintenance
Your chain saw requires winter maintenance. Please contact your local dealer for this.
It includes the following:

Replacing spark plug

Sharpening the chain

Cleaning of air filter (Replacement if necessary)

Cleaning of guide bar

Oil pump check up

Thorough cleanup

Fine tuning and testing
10.3 Air filter
Caution: never operate saw without the air filter. Dust and dirt will be drawn
into engine and damage it. Keep the air filter clean!
To clean air filter:
fig 15a
 Remove knob (A) holding air filter
cover in place; remove the top cover
(B) by loosening the cover retaining
screw. Cover will lift off. (fig. 15a)
B
A