Casio QV-R3 1 - Manual (Page 45)

45
BASIC IMAGE RECORDING
5.
Slide the zoom con-
troller towards
(Telephoto)/
to
change the zoom
factor.
• When zoom reaches
maximum optical zoom,
it stops momentarily.
Keep the zoom control-
ler pressed to the
(Telephoto)/
side and
zoom will switch over to
digital zoom.
• This causes the zoom indicator to appear on the moni-
tor screen. The zoom indicator shows the current ap-
proximate zoom factor.
6.
Compose the image and then press the shutter
release button.
IMPORTANT!
• Digital zoom is disabled whenever the monitor screen
is turned off (page 20).
Digital Zoom
Digital zoom is activated after you reach the maximum opti-
cal zoom factor (3X). It enlarges the part of the image at the
center of the image screen. The range of the digital zoom
factor is shown below.
Zoom Factor Range : 3X to 9.6X
(in combination with optical zoom)
1.
In a recording mode, press MENU.
2.
Use [ ] and [ ] to select the “REC” tab.
3.
Use [ ] and [ ] to select “Digital Zoom,” and
then press [ ].
4.
Select “On,” and then press SET.
• Selecting “Off” disables digital zoom.
1x 3x 9.6x
Current zoom factor
Optical Zoom
Digital
Zoom
Zoom indicator
Digital zoom indicator