Casio QV-R3 1 - Manual (Page 36)

GETTING READY
36
Configuring Display Language and Clock
Settings
Be sure to configure the following settings before using the
camera to record images.
• Display language
• Home city
• Date and time
Note that the current date and time settings are used by the
camera to generate the date and time that is stored along
with image data, etc.
IMPORTANT!
• The camera’s clock settings are cleared if power to the
camera is totally cut off for about 12 hours. This can
happen if the battery goes dead while the camera is
not being supplied power by the AC adaptor. The
clock setting screen will appear automatically the next
time you turn on power after the settings are cleared.
Set the date and time before using the camera.
• You also need to configure clock settings whenever
you replace the battery.
• Recording images without configuring the clock set-
tings causes incorrect time information to be regis-
tered. Be sure to configure the clock settings before
using the camera.