Casio QV-R3 1 - Manual (Page 42)

42
BASIC IMAGE RECORDING
Previewing the Last Image Recorded
Use the following procedure to preview the last image re-
corded, without leaving the current recording mode.
1. Press the PREVIEW button to display the last
image recorded.
• Pressing the PREVIEW button again returns to the re-
cording mode.
• The PREVIEW button does not perform any operation
if you press it immediately after turning on camera
power or immediately after entering to the recording
mode from the Play mode.
• Image preview cannot be used in the Movie Mode.
The preview image is cleared automatically whenever
the recording mode is changed.
Deleting an Image in a Recording Mode
You can use following procedure to delete the last image you
recorded without leaving the current recording mode.
IMPORTANT!
• Note that the image delete operation cannot be un-
done. Make sure you really do not need an image be-
fore you delete it.
1.
In a recording mode, press the PREVIEW but-
ton to display the last image you recorded.
2. Press .
3.
In response to the confirmation message that
appears, select “Delete.”
• Select “Cancel” to cancel the delete operation without
deleting anything.
4. Press SET.
• This deletes the image and returns to the recording
mode.