Casio QV-R3 1 - Manual (Page 35)

GETTING READY
35
Example: To select the
“Size” item.
3.
Press [ ] or [ ] to select the tab you want, and
then press SET to move the selection cursor
from the tab to the settings.
4.
Use [ ] and [ ] to
select the feature
whose setting you
want to configure,
and then press [ ].
• Instead of pressing [ ],
you could also press
SET.
5. Use [ ] and [ ] to change the currently se-
lected setting, and then press SET.
• This applies the setting.
NOTE
• The recording mode menu appears if you press the
MENU button before starting a record operation. It will
not appear if you press the MENU button during a
setup procedure, while the camera is standing by for
recording of the second image of a Coupling Shot op-
eration, etc.
• See “Menu Reference” on page 131 for more information
about menus.