Casio QV-2300UX - Manual (Page 61)

BASIC IMAGE RECORDING
E-61
3. Press the shutter release button to start the
self-timer countdown.
• The seconds are counted down on the monitor
screen.
• To stop a countdown part way through, press the shut-
ter release button.
NOTE
• You can rotate the lens mechanism so the lens points
in the same direction as the camera’s monitor screen.
This makes it possible for you to watch the self-timer
countdown on the monitor screen.
Select this setting
No display
10SEC
2SEC
To do this
Turn the self-timer off
Record 10 seconds after the
shutter release button is pressed
Record two seconds after the
shutter release button is pressed
Exposure Compensation
Whenever program AE, shutter speed priority AE, or aper-
ture priority AE is selected as the exposure mode, you can
adjust the exposure compensation value (EV value) within
the range shown below in order to compensate for current
lighting conditions. This setting can be used to obtain better
results when shooting with backlighting, indirect indoor light-
ing, a dark background, etc.
EV Value Range: –2EV to +2EV
Steps: 1/3EV
1.
Select program AE, shutter speed priority AE,
or aperture priority AE as the exposure mode.
See page E-74.
2.
Use [+] and [–] to change the exposure com-
pensation value (EV shift).
• The current EV value is shown on the monitor screen.