Casio QV-2300UX - Manual (Page 37)

GETTING ACQUAINTED
E-37
• In the PLAY mode, Auto Power Off trigger time is fixed
at five minutes.
• Sleep is disabled in the PLAY mode.
• Performing any button operation while the monitor is
asleep immediately wakes it up and restores normal
operation.
• The Auto Power Off setting is given priority if you have
“2 min” set for both Sleep and Auto Power Off. This
means that the camera turns off if you do not perform
any operation for about two minutes in the REC mode.
• Auto Power Off is automatically disabled when under
any one of the following conditions.
— While a slideshow is playing
— When you are performing operations on a com-
puter, printer, or other external device connected
to the camera’s DIGITAL terminal or USB port.
— While the AC adaptor is connected to the camera
To power save settings
1.
Turn on the camera and slide the REC/PLAY
selector to “REC”.
2. Press MENU.
3.
Use [+] (down) and [–] (up) to select “FUNC-
TION”, and then press the shutter release but-
ton.
4.
Use [+] (down) and [–] (up) to select the item
whose settings you want to change, and then
press the shutter release button.
• To make auto power off settings, select “Auto Power
Off”.
• To make sleep settings, select: “Sleep”.
5.
On the screen that appears, use [+] and [–] to
make the setting you want, and then press the
shutter release button.
Auto power off settings: “2 min” “5 min”
Sleep settings: “Off” “30 sec” “1 min” “2 min”