Casio QV-2300UX - Manual (Page 60)

BASIC IMAGE RECORDING
E-60
IMPORTANT!
• The values in the table below are all approximate, and
are affected by the types of images you record and
other factors.
• To determine the number of images that can be stored
on a memory card of a different capacity, multiply the
capacities in the table below, by the appropriate value.
• Note that the maximum number of images that can be
stored in a single folder is 250. Because of this, even
if you are using a card that allows storage of more
than 250 images, the camera’s monitor screen will
show its capacity for up to 250 images only.
• The number of images that can be recorded may differ
from the values shown above when you use Card
Browser (page E-130).
Using the Self-timer
You can set the self-timer to either one of two starting times.
1. Enter the REC mode.
2.
Press the button
to select the self-timer
time you want.
Self-timer Time Settings:
Each press of cycles through the available self-
timer settings described below.
SHIFT
INFO
MF
Self timer
Time