Casio QV-2300UX - Manual (Page 50)

BASIC IMAGE RECORDING
E-50
Image Recording when the Battery is Low
To protect against unexpected loss of image data, images
are recorded one-by-one whenever the battery level is indi-
cated as
or lower. The message “Press to cancel
save.” appears on the monitor screen during the save opera-
tion under this condition. As long as you do not press
,
the save operation continues and takes a few seconds to
complete. Be sure to replace all four batteries as soon as
possible after this message starts to appear.
Pressing
while the “Press to cancel save.” is on
the monitor screen cancels the image save operation.
• If you have a microdrive loaded in the camera, the above
message appears whenever the battery level is indicated
as
or lower.
• The message “Press to cancel save.” also appears
momentarily during save operations in the Panorama
Mode and Movie Mode. In this case, this message does not
indicate that battery power is low.
Using Zoom
Your camera is equipped with both optical zoom and digital
zoom capabilities.
Using Optical Zoom
Optical zoom enlarges the image by changing the focal dis-
tance of the lens. The optical zoom range depends on your
camera model.
• QV-2300UX: 1X to 3X
• QV-2800UX: 1X to 8X
1. Enter the REC mode.
2. Move the zoom slider to-
wards T (telephoto) to zoom
in on the subject, or W (wide-
angle) to zoom out.
T (TELE): Telephoto
W (WIDE): Wide-angle
REC
W T
PLAY
Zoom slider
W (WIDE) T (TELE)