Casio QV-2300UX - Manual (Page 57)

BASIC IMAGE RECORDING
E-57
Using the Infinity Mode
The Infinity Mode sets the focus near infinity. It is a good
choice for scenery and other far-off subjects. Focus adjust-
ment starts automatically whenever you press the shutter
release button about half way down.
1.
Press to cycle through the focus
mode settings until the indicator appears
on the display. This indicates the Infinity
Mode.
2.
Compose the image and record it.
• See “Using the Auto Focus Mode” on page E-55 for
information about how the camera focuses an image
automatically.
• You can check the current status by looking at the op-
eration lamp and focus frame. See “Using the Auto
Focus Mode” on page E-55 for more information.
Using the Manual Focus Mode
With Manual Focus, you make the required focus settings by
hand. The following shows the relationship between optical
zoom factor and the focusing distance for the Manual Focus
Mode.
1.
Press to cycle through the focus
mode settings until the indicator appears
flashing on the display. This indicates the
Manual Focus Mode.
2.
While the indicator is flashing, use [+] and
[–] to focus the image.
• If you do not perform any focus operation for about
two seconds, the indicator stops flashing.
• You can press while the indicator is
on the monitor screen to change to another focus
mode, if you want.
Optical Zoom Factor
1X
3X
1X
8X
Focusing Distance
1cm to
∞
50cm to
∞
1cm to
∞
1m to
∞
QV-2300UX
QV-2800UX